18 to three-way tipping trailer

Tandem Three-Way Tipper HTK from 18 t

HTK 18 T - Designed for heavy use

The largest and most economical of the three-way tippers has a conveniently low load height for its class and has 600 mm high drop sides giving a large load volume. The extra-wide tyres ensure low ground pressure and mean that you will get through, even on bad roads and tracks.

Details of the HTK tandem three-way tipper from 18 t:

- Axles with drum brake, maintenance-free parabolic suspension for optimal load compensation.

- Pneumatic brake with release valve; compressed air coupling heads (red/yellow); anti-lock braking system; EBS brake system with spring-loaded parking brake and 24-volt connection plug. The towing vehicle must be equipped with an ABS socket.

- 15-way connecting plug

- 2 wheel chocks with retainers

- Reinforced 12 t geared support jack with load and fast speeds, on the left in the direction of travel

- Galvanised central tube with screw-in towing eye Ø 40 mm, galvanised and infinitely variable using a crank handle.

- Laser-welded, high-quality steel sideboards, 500 mm height, can be folded down at the sides and rear, removable and hinged with central lock, bulkhead removable.

- Extra-wide single tyres for low ground pressure.

- 24 V lighting system with multiple-chamber tail lamps, optimally protected and LED side marking lamps.

- Tie-down points: 6 t lashing points recessed in the platform floor (2 pairs / 5.2 m; 3 pairs / 6.2 m); s t lashing points in outside frame (6 pairs / 5.2 m; 7 pairs / 6.2 m)

- Solid, welded, and hot-dip galvanised frame for optimal stability and safety; platform floor made of 4 mm fine grained steel, swap-proof rocker-bearing bolts.

- Platform frame hot-dip galvanised with longitudinal transverse and diagonal struts for high stability and point-load resistance.

- Drop sides primer-painted with high-quality two-component paint for optimal corrosion protection, hollow chambers are sealed, painted in a single colour in RAL as requested.

- Motor-powered, hydraulic three-way tipping system, with high-quality two-component paint for optimal corrosion protection, hollow chambers are sealed, painted in a single colour in RAL as requested.

- Mudguards equipped with anti-spray system, rigid lateral impact protection.

TCHNICAL DATA:

HTK 185024
Permissible gross weight (kg)	18.000	Internal dimensions (mm)	5.040 x 2.420 x 500
Own weight (kg)	3.900	Body dimensions (mm)	6.950 x 2.550 x 1.710
Load capacity (kg)	14.100	Tilting angle	45°/48°
Load height (mm)	1.095	Tyre size	435/50 R19,5 x 4 pcs.

HTK 185024 (with air suspension)
Permissible gross weight (kg)	18.000	Internal dimensions (mm)	5.040 x 2.420 x 500
Own weight (kg)	3.900	Body dimensions (mm)	6.950 x 2.550 x 1.710
Load capacity (kg)	14.100	Tilting angle	45°/48°
Load height (mm)	1.135	Tyre size	435/50 R19,5 x 4 pcs.

HTK 185524
Permissible gross weight (kg)	18.000	Internal dimensions (mm)	5.540 x 2.420 x 500
Own weight (kg)	4.200	Body dimensions (mm)	7.450 x 2.550 x 1.710
Load capacity (kg)	13.800	Tilting angle	45°/48°
Load height (mm)	1.095	Tyre size	435/50 R19,5 x 4 pcs.

HTK 185524 (with air suspension)
Permissible gross weight (kg)	18.000	Internal dimensions (mm)	5.540 x 2.420 x 500
Own weight (kg)	4.200	Body dimensions (mm)	7.450 x 2.550 x 1.710
Load capacity (kg)	13.800	Tilting angle	45°/48°
Load height (mm)	1.135	Tyre size	435/50 R19,5 x 4 pcs.